Abstract
Market demand for electrical products by standard electrical products defines the demand for stamping tools. The design of the tool is based on the requirements of easy assembly, disassembly and maintenance. The development of such tools requires the designer to meet complex requirements, some of which are only defined at the beginning, so that the most precise specifications possible are necessary right at the start of the design process. In order to meet the required complex product geometry, product tolerance and the number of products required by the customer, the development of a multi-row punching tool is shown. The tool consists of an upper and a lower part, which are appropriately positioned accordingly and fixed to the stamping machine. The force required to stamp and the force required to detach the guide plate from the sheet metal were determined. The functionality of the developed tool and the stamping process is shown in its entirety, from the entry of the sheet into the tool to the exit of the finished product. The products obtained by stepwise stamping are rotors and stators, which are the basic elements of any electrical device.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Margić, S., Rebec, B.: Stamping Part I. Sveučilišna naklada Liber, Zagreb (1990)
Dinesh, K.V., Madesh, R.: Design and stress analysis of washer tool. Int. J. Appl. Theoret. Sci. Technol. 1(8), 194–200 (2015)
Mastanamma, C., Prasada Rao, K., Venkateswara Rao, M.: Design and analysis of progressive tool. Int. J. Eng. Res. Technol. (IJERT) 1(1) (2012)
Jaya Laxmi, B., Vijaya Kumar, Y.: Design of progressive die using FE analysis. Int. J. Res. Modern Eng. Emerg. Technol. 2(1) (2014)
Suchy, I.: Handbook of Die Design, 2nd edn. McGraw Hill, Michigan (2006)
Özdemir, M.: Modelling and prediction of effect of machining parameters on surface roughness in turning operations. Technical Gazette 27(3), 751–760 (2020). https://doi.org/10.17559/TV-20190320104114
Šarić, T., et al.: Modelling and prediction of surface roughness in CNC turning process using neural networks. Technical Gazette 27(6), 1923–1930 (2020). https://doi.org/10.17559/TV-20200818114207
Mijović, B.: Maintenance of Machines and Devices. Veleučilište u Karlovcu, Karlovac (2019)
Rejac, E.: Terotechnology-Modern Organization of Maintenance of Funds. Informator, Zagreb (1974)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2022 The Author(s), under exclusive license to Springer Nature Switzerland AG
About this paper
Cite this paper
Marijić, J., Vilić, M., Grgić, I., Karakašić, M., Ivandić, Ž. (2022). Development, Structure and Design of Stamping Tool. In: Glavaš, H., Hadzima-Nyarko, M., Karakašić, M., Ademović, N., Avdaković, S. (eds) 30th International Conference on Organization and Technology of Maintenance (OTO 2021). OTO 2021. Lecture Notes in Networks and Systems, vol 369. Springer, Cham. https://doi.org/10.1007/978-3-030-92851-3_4
Download citation
DOI: https://doi.org/10.1007/978-3-030-92851-3_4
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-92850-6
Online ISBN: 978-3-030-92851-3
eBook Packages: EngineeringEngineering (R0)